FiberThree F3 PA-GF Pro

Polyamide technical filament modified for 3D printing with additional glass fiber filler content.

Material properties

The glass fibers minimize shrinkage; warping behavior is thus largely reduced. The material exhibits enormous strength while retaining impact strength with a very low tendency to warp and very good layer adhesion. The good heat and media resistance makes it suitable for all applications for high-strength lightweight parts. Rough surface appearance with matt gloss. Very stiff filament that can break in the feed at tight bending radii. The material differs from F3 PA-CF Pro in the lack of conductivity of the fibers with slightly lower strengths.

Processing notes

The use of abrasion-resistant nozzles is strongly recommended. The filament must be stored and printed dry for the best printing results.