INFINAM® FR 4100 L

Flame-retardant photopolymer with outstanding mechanical properties

With INFINAM® FR 4100 L, Evonik is responding to the demand from several branches of industry for a high-quality, flame-retardant photopolymer.

Evonik's INFINAM® FR 4100 L is classified V@03mm according to the globally recognized UL 94 standard. This guarantees the extinguishing of a flame within 10 seconds and a maximum afterglow time of 30 seconds.

INFINAM® FR 4100 L, which was specially developed for the DLP process, also boasts fantastic elongation at break. This means that even applications in which strong, permanent forces are applied are no problem.

INFINAM® FR 4100 L can be used in a wide range of applications. The automotive, aerospace and electronics industries in particular benefit massively from the fantastic properties of this photopolymer.

To complete the flame retardant properties, INFINAM® FR 4100 L has been intensively tested for smoke development and toxicity and has delivered excellent results. This enables use even under the most difficult conditions.

Technical information:

Tensile Strength (MPa) = 1,900

Elongation at Break (%) = 20

Flexural Modulus (MPa) = 1,800

Bending Stress at 5% Elongation (MPa) = 61

Shore Hardness (D) = 84

Due to its exceptional flame retardancy combined with its outstanding durability, INFINAM® FR 4100 L is suitable for a wide range of applications. Whether motorsport, automotive or aerospace - when exceptional flame retardancy, strength and durability are required, INFINAM® FR 4100 L is the ideal choice!